Technical papers

Published at the Transaction and International conference in last three years (2011-2013)

2016
Xihang Cao, Takeo Ishikawa, "Optimum design of a regenerative braking system for electric vehicles based on fuzzy control strategy", IEEJ Transactions on Electrical and Electronic Engineering, Vol. 11-S1,pp.S186-S187, June 2016 Abstract

N. Kurita, T. Ishikawa, N. Saito, T. Masuzawa, "A Double Side Stator type Axial Self-bearing Motor Development for the Left Ventricular Assist Device", International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 1-2, pp. 199-206, 2016 Abstract

S. Mizuno, T. Ishikawa, N. Kurita, "Rotor Structure Design of Permanent Magnet Synchronous Generator by Topology Optimization Method Using GA", International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 3-4, pp. 1453-1460, 2016 Abstract

M. Sato, R. Oya, T. Ishikawa, "Development of Marx Generator Type Pulsed Power System with MOSFETs and Underwater Pulsed Electric Discharge", International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 3-4, pp. 1531-1536, 2016 Abstract

book title: Optimization Algorithms- Methods and Applications, ISBN 978-953-51-2593-8, Chapter 12, Topology Optimization Method Considering Cleaning Procedure and Ease of Manufacturing, 2016.9

T. Ishikawa, "Failure Diagnosis for Demagnetization in Permanent Magnet Synchronous Motor", 2016 IEEE PES(Power and Energy) General Meeting, Boston, 2016.7.20 Abstract

T. Ishikawa, T. Watanabe, S. Mizuno, and N. Kurita, "Effect of Cleaning Level on Topology Optimization of Permanent Magnet Synchronous Generator", ICEMS2016, DS5G-2-13, Chiba Japan, 2016.11.14 Abstract

N. Kurita, T. Ishikawa, and H. Kamata, "Magnetically Levitated Motor with Five Actively Controlled Degrees of Freedom", ICEMS2016, DS6G-3-4, Chiba Japan, 2016.11.15

T. Ishikawa, S. Mizuno, and N. Krita, "Topology Optimization Method for Asymmetrical Rotor Using Cluster and Cleaning Procedure", IEEE CEFC MP081, Miami, 2016.1 Abstract

T. Ishikawa, S. Amada, K. Segawa, and N. Kurita, "Proposal of a Radial- and Axial-Flux Permanent MagnetSynchronous Generator", IEEE CEFC WP041, Miami, 2016.1 Abstract

2015
N. Kurita, T.Ishikawa, H. Takada, G. Suzuki, "Proposal of a Permanent Magnet Hybrid-type Axial Magnetically Levitated Motor", IEE Japan, Journal of Industry Applications, vol.4, no.4, pp.339-345, 2015Abstract

S. Shinagawa, T. Ishikawa, N. Kurita, "Characteristics of Interior Permanent Magnet Synchronous Motor with Imperfect Magnets", IEE Japan, Journal of Industry Applications, vol.4, no.4, pp.346-451, 2015Abstract

T. Ishikawa, P. Xie, N. Kurita, "Topology Optimization of Rotor Structure in Permanent Magnet Synchronous Motors Considering Ease of Manufacturing", IEE Japan, Journal of Industry Applications, vol.4, no.4, pp.469-474, 2015Abstract

T. Ishikawa, S. Mizuno, N. Kurita, "Generator Characteristics of an Interior Permanent Magnet Machine Designed by a Topology Optimization with GA Considering Cluster of Materials", 日本AEM学会誌，Vol.23，No.3，pp.545-550，2015（J. the Japan Society of Applied Electromagnetics and Mechanics, Vol.23, No.3, pp.545-550,2015）Abstract

N. Kurita, T. Ishikawa, G. Suzuki, "Proposal of a magnetically levitated shaded pole induction motor", Mechanical Engineering Journal, Vol. 2 (2015) No. 6 Paper No. 14-00533Abstract

S. Yamakami, T. Ishikawa, N. Kurita, "A simple measurement method for inductors of DC/DC converter", J. the Japan Society of Applied Electromagnetics and Mechanics, Vol. 23, No. 4, pp.698-704, 2015Abstract

T. Ishikawa, S. Mizuno, N. Kurita, "Characteristics of a Permanent Magnet Synchronous Machine Designed by a Topology Optimization Method", J. Matr. Sci. Forum, Vol.856, pp.172-177, 2016Abstract

N. Kurita, T. Ishikawa, G. Suzuki, "Development of the two pole type shaded pole self-bearing motor", J. Matr. Sci. Forum, Vol.856, pp.196-201, 2016Abstract

T. Ishikawa, X. Huang, K. Segawa and N. Kurita, "Design of an axial-flux type permanent-magnet generator," IEEE International Magnetics Conference FZ-07, Beijin, 2015.5.14 Abstract

T. Ishikawa, S. Mizuno and N. Kurita, "Characteristics of a Permanent Magnet Synchronous Machine Designed by a Topology Optimization Method", JAPMED'9, pp.37-38, Sofia, Bulgaria, 2015.7.6. Abstract

N. Kurita, T. Ishikawa, and G. Suzuki, "Proposal of the two pole type shaded pole self-bearing motor", JAPMED'9, pp.77-78, Sofia, Bulgaria, 2015.7.7.Abstract

N. Kurita, T. Ishikawa, N. Saito, T. Masuzawa, "A Double Side Stator type Axial Self-bearing Motor Development for the Left Ventricular Assist Device", The 17th ISEM, 1P2-A-3, Awaji, 2015.9.16Abstract

S. Mizuno, T. Ishikawa, N. Kurita, "Rotor Structure Design of Permanent Magnet Synchronous Generator by Topology Optimization Method Using GA", The 17th ISEM, PS1-29, Awaji, 2015.9.16Abstract

2014
R. Shimada, T. Ishikawa, N. Kurita, "Effect of Current Control Methods on Efficiency of Interior Permanent Magnet Synchronous Motor Driven by Position Sensorless Control", J. the Japan Society of Applied Electromagnetics and Mechanics, Vol. 22, No. 2, pp.114-119, 2014 Abstract

T. Ishikawa, Y. Sato, and N. Kurita, "Performance of Novel Permanent Magnet Synchronous Machines Made of Soft Magnetic Composite Core", IEEE Transactions on Magnetics, vol. 50, no. 11, pp.8105304, November, 2014Abstract

T. Ishikawa, Y. Sato, and N. Kurita, "Performance of Novel Permanent Magnet Synchronous Machines Made of Soft Magnetic Composite Core", IEEE International Magnetics Conference, Dresden Germany, EP-3, 2014.5.7 Abstract

S. Shinagawa, T. Ishikawa, N. Kurita, "Characteristics of Interior Permanent Magnet Synchronous Motor with Imperfect Magnets", 19P3-3, International Power Electronics Conference (IPEC), Hiroshima, 2014.5.19Abstract

N. Kurita, T. Ishikawa, H. Takada, G. Suzuki, "Proposal of a Permanent Magnet Hybrid Type Axial Magnetically Levitated Motor", 20C3-2 invited, International Power Electronics Conference (IPEC Yokohama), Hiroshikma, 2014.5.20Abstract

K. Shiobara, S. T. Castillo, T. Ishikawa, and N. Kurita, "An Accident Prevention of An Electric Vehicle with Induction Motor by Ultrasonic Sensor", 20144069, EVTeC and APE Japan, Yokohama, 2014.5.22Abstract

T. Ishikawa, S. Mizuno and N. Kurita, "Generator Characteristics of an Interior Permanent Magnet Machine Designed by a Topology Optimization with GA Considering Cluster of Materials, 8th Asia-Pacific Symposium on Applied Electromagnetics and Mechanics, pp.94-95, Taichung, Taiwan, July, 24 2014,Abstract

Nobuyuki Kurita, Takeo Ishikawa, Genri Suzuki, "Proposal of a magnetically levitated shaded pole induction motor", The 12th International Conference on Motion and Vibration, Paper No. 1D36, Sapporo, Japan, August, 4 2014,Abstract

Nobuyuki Kurita, Jun Mohara, Takeo Ishikawa, and Genri Suzuki, "Magnetically levitated motor development for bi-ventricular assist device", Proc. of GUMI&AMDE 2014, Paper No. PO22 (2014)Abstract

Optimization design of magnetically suspended system for the BiVACOR total artificial heart, The 14th International symposium on Magnetic Bearing, pp. 437-440, Linz, Austria, August 13 2014Abstract

2013年
Development of a Five Degrees of Freedom Active Control Magnetic Levitated Motor, IEEE Trans. on Magnetics, vol.49, no.5, pp.2257-2262, 2013Abstract

A Study on a Novel 5-DOF Active Controlled Magnetic Levitated Motor, Transactions of the JSME, Series C, Vol. 79, No. 801, pp. 236-249, 2013.5Abstract

Analysis for Fault Detection of Brushless DC Motor with Permanent-Magnet Defect, IEEE Trans. on Magnetics, vol.49, no.5, pp.2331-2334, 2013Abstract

A study on dynamic characteristics and the power generation characteristics of the magnetically levitated hydraulic generator, Int. J. Advanced Mechatronic Systems, Vol. 5, No. 3, 2013 193-201Abstract

Analysis and Failure Diagnosis of Squirrel-Cage Induction Motor with Broken Rotor Bars and End Rings, IEEJ Journal of Industry Applications, vol.2, no.6, pp.292-297,2013Abstract

A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Journal of International Conference on Electrical Machines and Systems, vol. 3, no. 1, pp.54-60, 2014Abstract

Optimization of Rotor Topology in PM Synchronous Motors by Genetic Algorithm Considering Cluster of Materials and Cleaning Procedure, IEEE Trans. on Magnetics, vol. 50, no. 2, FEBRUARY 2014 7015704Abstract

Optimum Design of a Switched Reluctance Motor Fed by Asymmetric Bridge Converter Using Experimental Design Method, IEEE Trans. on Magnetics, vol. 50, no. 2, FEBRUARY 2014 7019304Abstract

Optimization of Rotor Topology in PM Synchronous Motors by Genetic Algorithm Considering Cluster of Materials and Cleaning Procedure, 19th International Conference on the Computation of Electromagnetic Fiels (Compumag 2013), PA4-9, Butapest, Hungary, 2013.7.1Abstract

Optimum Design of a Switched Reluctance Motor Fed by Asymmetric Bridge Converter Using Experimental Design Method, 19th International Conference on the Computation of Electromagnetic Fiels (Compumag 2013), PB3-3, Butapest, Hungary, 2013.7.2Abstract

Development of a Double Stator Type Axial Magnetically Levitated Motor, 19th International Conference on the Computation of Electromagnetic Fiels (Compumag 2013), PC6-17, Butapest, Hungary, 2013.7.3Abstract

Transient Performance of a Novel Permanent Magnet Synchronous Motor Made of Soft Magnetic Composite Core, International Symposium on Applied Electromagnetics and Mechanics, pp.383-384, Quebec City, Canada, 2013.7.31Abstract

Development of a Pulsed Power System Using MOSFETs and Underwater Pulsed Electric Discharge, International Symposium on Applied Electromagnetics and Mechanics, pp.519-520, Quebec City, Canada, 2013.8.1Abstract

A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, 2013 International Conference on Electrical Machines and Systems, PDMC-1875, Busan Korea, 2013.10.28Abstract

2012
Generation of Music Scale from Brushless DC Motor with Surface Permanent Magnets", Noise Control Engr. J. 60 (6), pp.763-769, 2012Abstract

Design of a DC Motor Made of Soft Magnetic Composite Core by the Experimental Design Method", IEEE Trans. on Magnetics, vol.48, no.11, pp.3132-3135, 2012Abstract

Design and Development of Switched Reluctance Motors by the Experimental Design Method, 日本AEM学会誌, vol.20, no.2, pp.391-396, 2012Abstract

（Book）T. Ishikawa, "Analysis of Natural Frequency, Radial Force and Vibration of Induction Motors Fed by PWM Inverter", Chapter 9 of Induction Motors - Modelling and Control, ISBN 978-953-51-0843-6, edited by Rui Esteves Arauujo, http://www.intechopen.com/articles/show/title/analysis-of-natural-frequency-radial-force-and-vibration-of-induction-motors-fed-by-pwm-inverter

Development of a Five Degrees of Freedom Active Control Magnetic Levitated Motor", 15th Biennal IEEE Conference on Electromagnetic Field Computation, MP5-25, Oita, 2012.11.12

Analysis for Fault Detection of Brushless DC Motor with Permanent-Magnet Defect", 15th Biennal IEEE Conference on Electromagnetic Field Computation, WA1-1, Oita, 2012.11.14Abstract

Analysis for Failure Diagnosis of Induction Motor with Broken Rotor Bar and End Ring", 15th Biennal IEEE Conference on Electromagnetic Field Computation, MP5-8, Oita, 2012.11.12Abstract

Analysis and Failure Diagnosis of Squirrel-Cage Induction Motor with Broken Rotor", Proc. of the 15th International Conference of Electrical Machines and systems (ICEMS2012), DS2G2-9, Sapporo, 2012.10.22Abstract

Topology Optimization of Rotor Structure in a PM Synchronous Motor for Two Current Driving Methods by Genetic Algorithm Considering the Cluster", Proc. of the 15th International Conference of Electrical Machines and systems (ICEMS2012), DS1G5-2, Sapporo, 2012.10.22Abstract

Development of a High-Frequency Pulsed Power Generation System Using MOSFETs", The 2012 Asia - Pacific Symposium on Applied Electromagnetics & Mechanics, p.346-351, Ho Chi Minh City, Vietnam, 2012.7.26. Abstract

Design of a DC Motor Made of Soft Magnetic Composite Core by the Experimental Design Method", IEEE International Magnetics Conference,, Vancouver, Canada, 2012.5.8.Abstract

Diagnosis of Permanent Magnet Faults in Interior Permanent Magnet Motor", The 2012 Asia - Pacific Symposium on Applied Electromagnetics & Mechanics, p.44-49, Ho Chi Minh City, Vietnam, 2012.7.25. Abstract

Analysis of Novel Brushless DC Motors Made of Soft Magnetic Composite Core, IEEE Transactions on Magnetics, Vol. 48, No. 2, pp.971-974, 2012Abstact

Topology Optimization of Rotor Structure in Brushless DC Motor with Concentrated Windings Using Genetic Algorithm Combined with Cluster of Material, IEEE Transactions on Magnetics, Vol. 48, No. 2, pp.899-902, 2012Abstract

2011
High-frequency Voltages for Accurate Estimation of Rotor Position in Position Sensorless Brushless DC Motor, Journal of the Japan Society of Applied Electromagnetics and Mechanics (JSAEM) Vol.19, No.3, pp.544-549,2011Abstract

A study on the Basic Characteristics of a Novel Design Active Magnetic Bearing with Permannet Magnet Vias Flux, 電気学会論文誌D, vol. 131, No. 8, pp.1000-1006, 2011(Japanese)Abstract

Characteristic Analysis and Failure Diagnosis of Interior Permanent Magnet Motor with Demagnetized Magnet, Jouanal of the Japan Society of Applied Electromagnetics and Mechanics, vol.19，no.2，pp261-266，2011(Japanese)Abstract

An Optimal Material Distribution Design of Brushless DC Motor by Genetic Algorithm Considering a Cluster of Material, IEEE Transactions on Magnetics, vol.47, no.5, pp.1310-1313, 2011Abstract

Design of Magnet Arrangement in Interior Permanent Magnet Synchronous Motor by Response Surface Methodology in Consideration of Torque and Vibration, IEEE Transactions on Magnetics, vol.47, no.5, pp.1290-1293, 2011Abstract

電気学会技術報告第1230号「国内外から見たインバータ駆動誘導電動機の課題」，インバータ駆動誘導電動機の国際規格整合・ｻ調査専門委員会編，2011年8月，2.1主回路方式pp.4-6担当(Japanese)

Failure Diagnosis of Brushless DC Motor with Rotor Magnet Defect", IEEE 2011 International Electric Machines and Drives, pp.1561-1565, Niagara Canada, 2011.5.18Abstract

Design of Rotor Structure in Brushless DC Motor with Concentrated Windings Using Genetic Algorithm Combined with Cluster of Materials, Compumag2011, PB1.4, Sydney, 2011.7.13Abstract

Analysis of Novel Brushless DC Motors Made of Soft Magnetic Composite, Compumag2011, PB10.16, Sydney, 2011.7.13Abstract

Analysis of vibration and music scale of brushless DC motor with surface permanent magnets, 40th International Congress and Exposition on Noise Control Engineering, Osaka, 2011.9.5Abstract

Design and Development of Switched Reluctance Motors by the Experimental Design Method, The 20th MAGDA Conference in Pasific Asia, pp.203-208, Nov. 14-16, 2011, Kaohsiung TaiwanAbstract

Levitation Characteristics of the Lorentz Force Type Magnetic Bearing," The 20th MAGDA Conference in Pasific Asia, pp.243-247, Nov. 14-16, 2011, Kaohsiung TaiwanAbstract

3-D Soft Magnetic Composite Core Superior in the Downsizing of Motors, The 20th MAGDA Conference in Pacific Asia, pp.355-360, Nov. 14-16, 2011, Kaohsiung TaiwanAbstract

Estimation of Magnetization Distribution in Permanent Magnet of Brushless DC Motor, T. Ishikawa, K. Yonetake, N. Kurita and M. Tsuchiya, Materials Science Forum, Vol. 670, pp. 360-368, 2011　Abstract

Development of Lorentz force type magnetic bearing, N. Kurita, T. Ishikawa and Y. Okada, Development of Lorentz force type magnetic bearing, Materials Science Forum, Vol. 670, pp. 455-465, 2011 Abstract

Back to the contents of studies